SafetyTac® Hazard’s low profile allows it to sit smoothly on your floors, so it will not create a tripping hazard.
SafetyTac® Hazard can withstand the tough conditions of an industrial workplace. It will hold up to forklifts and pallets, water and cleaning, carts, and even chemical spills.
Easy to Install
Applying SafetyTac® Hazard to the floor is simple. Remove the backing, lay the tape on the floor, and press it down. No dry time required.
1 Year Limited Warranty
As long as they are installed and maintained properly, SafetyTac® Industrial Floor Tape comes with a one-year warranty. If you have a problem before your warranty period is up, we'll replace your tape for free.
Available in 4 Colors and 4 Widths
A variety of color and size options give you the ability to visually mark your facility for safety & efficiency. SafetyTac® Hazard is available in 4 color variations and in 4 widths.
Easy to Clean
SafetyTac® Hazard has a smooth, slip resistant surfact that allows for easy cleaning. Use SafetyTac® Floor & Tape Cleaner or any mild detergent.
SafetyTac® Hazard floor marking tape is designed to draw attention to dangerous areas in the workplace, while also holding up to the tough conditions of an industrial facility. The two-tone stripe pattern comes in 4 color options so you can highlight different types of hazards. SafetyTac® Hazard's durable material can withstand traffic and spills, and its reinforced rubber-based adhesive keeps it in place, so you can count on it getting the job done for a long time. SafetyTac® Hazard's dual-stage low profile allow wheels and pallets to slide over it without snagging, meaning the tape won't get damaged either.
Combine with hazard signs to create a safer facility. Unlike our SafetyTac and SafetyTac Armor, the SafetyTac Hazard has a matte finish instead of a glossy finish.
|Thickness:||35 mil wear-resistant rigid PVC|
|Surface:||Smooth, slip-resistant finish for easy cleaning|
|Material:||Made from rigid Shore D80 material|
|Adhesive:||Extremely durable dual-sided cloth adhesive|
|Peel Strength:||14 N/25 mm|
|Tensile Strength:||80 N/25 mm|
|Application Temperature:||40°F to 90°F (4.5°C to 32°C)|
|Service Temperature:||0°F to 130°F (-18°C to 54°C)|
|Warranty:||1 year limited|
- Designed to draw attention to dangerous areas
- Holds up in tough, industrial environments
- Withstands traffic and spills
- Easy to install, easy to clean
- 1 year limited warranty
Send me information about SafetyTac® Hazard
Get more information about this product and one of our sales representatives will be in touch with you shortly!
We stand behind our industrial floor tapes, which are the best on the market. SafetyTac® Industrial Floor Tape, SafetyTac® Lean, and SafetyTac® Hazard all include a one-year warranty as long as they are installed and maintained correctly. If you have issues less than a year after your purchase, Creative Safety Supply will send you new tape for free.
Best Practice Guides
Many types of floor marking tape exist, and you may be wondering which one is most suitable for your workspace.
To help you decide, we'll send you a box of free floor tape samples so you can give them a try.
Featured Product Videos - (view all)
- SafetyTac® Industrial Floor Tapes - The Toughest Floor Tapes on the Planet
- Get More out of SafetyTac® with LabelTac®
SafetyTac® Tutorials - (view all)
- How to Install SafetyTac® Floor Tape
- SafetyTac® Industrial Applicator: Loading and Installation
- Custom Floor Signs with LabelTac® and SafetyTac®
- Industrial Label Protection for Floor Signs and Labels
- How to Remove the Backing Liner from SafetyTac®
- Installing SafetyTac® Crosswalk
- How to Make Corners when Installing SafetyTac®